Here you can see an example of some pretty extreme paintless dent repair on a Toyota Tacoma. On a typical day we can repair a large number of small “door dings”. Unlike this repair we would only be able to do a few of these a day! These are more time consuming, but can still be repaired under the right circumstances! If Paintless dent repair is a possibility for your dent then you will likely save hundreds of dollars compared to using a traditional body shop!
Here you can see a before/after picture of a repair Auto Dent Solution did on a Ford Mustang. This was a pretty sharp dent caused by falling boxes in the garage! We used a bit of heat while we worked this one out to preserve the original paint. The owner had a buyer lined up for this car before it got dented, but thankfully we were able to get it good as new for the new buyer!
Auto Dent Solution and its technicians are trained to work on all makes and models, including trucks. We receive many repair orders for all types of cars, but lets not forget all those pickup drivers! As you can see below we had a sharp dent located on the corner of the truck bed, which can be a fairly difficult repair. We were able to repair this dent in about an hour and it was done right at the customers house.
Sharp dents can be repaired using the process of Paintless Dent Repair. These sharp dents often require more time to repair and sometimes need to be heated up with a heat gun to keep the paint more flexible to avoid cracking. This dent was fixed on a Ford F-150.
Many people believe that Paintless Dent Repair would be an uncommon practice on commercial or fleet vehicles. However at Auto Dent Solution we service many different vehicle types whether it be retail, wholesale, or commercial vehicles. Here we have a F-250 box truck that one of our accounts wanted to clean up, because appearance can be everything for a business! This is a dent we removed from the front passenger side fender.
Here is Eric getting ready to work on a customer car over at Mercedes Benz of Sarasota. This particular customer had just purchased two new cars the week before and somewhere along the line a small dent got put into the passenger side door. The ADS crew is always around to get those pesky dents and dings out of the way!
In certain scenarios the best option to start with in removing a dent is our glue pulling system. This system involves a basic hot glue gun with special glue that we use to stick to the vehicle and then is slowly pulled out with one of our slide hammers.