Dent on body lines are naturally more difficult to repair but don’t rule out paintless dent repair without first getting an estimate! Most body line dent can still be repaired as long as the metal is not too stretched!
Here you can see an example of some pretty extreme paintless dent repair on a Toyota Tacoma. On a typical day we can repair a large number of small “door dings”. Unlike this repair we would only be able to do a few of these a day! These are more time consuming, but can still be repaired under the right circumstances! If Paintless dent repair is a possibility for your dent then you will likely save hundreds of dollars compared to using a traditional body shop!
Here you can see a before/after picture of a repair Auto Dent Solution did on a Ford Mustang. This was a pretty sharp dent caused by falling boxes in the garage! We used a bit of heat while we worked this one out to preserve the original paint. The owner had a buyer lined up for this car before it got dented, but thankfully we were able to get it good as new for the new buyer!
Auto Dent Solution and its technicians are trained to work on all makes and models, including trucks. We receive many repair orders for all types of cars, but lets not forget all those pickup drivers! As you can see below we had a sharp dent located on the corner of the truck bed, which can be a fairly difficult repair. We were able to repair this dent in about an hour and it was done right at the customers house.
Here we have a dent that was repaired on a Nissan Quest rear lift gate. We call this the mystery dent because no one knows how the dent got there! This is actually not all that uncommon because often times when someone bumps into an unattended car there is no information left from the person who did it. Nevertheless Auto Dent Solution is always available for a quick and affordable repair!
Many people believe that Paintless Dent Repair would be an uncommon practice on commercial or fleet vehicles. However at Auto Dent Solution we service many different vehicle types whether it be retail, wholesale, or commercial vehicles. Here we have a F-250 box truck that one of our accounts wanted to clean up, because appearance can be everything for a business! This is a dent we removed from the front passenger side fender.
Here we have a Bentley convertible that had multiple dents on the rear quarter panel. Convertible rear quarter panels are especially difficult to access because of the extra bracing and panels for the convertible top to be able to lower down. However if there is a will there is a way, the ADS team was able to find a small access above the wheel well liner and got those dents out!
Today we had the opportunity to work on our very first 2015 F-150 that got dented while being transported to the Ford dealership! The new F-150s have all aluminum panels which is claimed to be more dent resistant. We can vouch for that at Auto Dent Solution, being that we have worked on many aluminum panels in our days. How ever just as it can be more dent resistant, it is also a bit more difficult to repair. That being said we got the dent out in time to be delivered to the customer free of Dents!