Tag Archives: paintless dent repair

Dents on body lines

Dent on body lines are naturally more difficult to repair but don’t rule out paintless dent repair without first getting an estimate! Most body line dent can still be repaired as long as the metal is not too stretched!

Truck Dent Removal

dent removal under lighting

Dents under the light!

Visibility is important, regardless of if we’re using the sunlight or inside during a rainy day. Using artificial lighting indoors helps us achieve great results. After our work is finished, you won’t see any dents no matter what lighting!

dent removal under lighting

PDR Light Source

Severe fender dent

Here we have a pretty severe fender dent that made creases at a couple different angles. This was repaired by gaining access from the under side of the fender which is just a plastic liner that is held in by a few plastic clips. We then  would massage the dent out with our PDR tools while applying heat to preserve the paint. When we reach the finished product all that’s left is to put back the fender liner and clean up the area!

Dent Removal

Mustang Dent Repair

Mustang Dent Repair

Mustang Dent Repair

Here you can see a before/after picture of a repair Auto Dent Solution did on a Ford Mustang. This was a pretty sharp dent caused by falling boxes in the garage! We used a bit of heat while we worked this one out to preserve the original paint. The owner had a buyer lined up for this car before it got dented, but thankfully we were able to get it good as new for the new buyer!

Pickup Truck Dents

Auto Dent Solution and its technicians are trained to work on all makes and models, including trucks. We receive many repair orders for all types of cars, but lets not forget all those pickup drivers! As you can see below we had a sharp dent located on the corner of the truck bed, which can be a fairly difficult repair. We were able to repair this dent in about an hour and it was done right at the customers house.

Truck Dent Removal

Truck Dent Removal

Dent Removal

Bentley convertible

Here we have a Bentley convertible that had multiple dents on the rear quarter panel. Convertible rear quarter panels are especially difficult to access because of the extra bracing and panels for the convertible top to be able to lower down. However if there is a will there is a way, the ADS team was able to find a small access above the wheel well liner and got those dents out!

11217182_997909470249997_8687762834828375162_n

Facebook Give away!

Want to play a game??
ADS will be giving away a Meguires Auto Detail kit as well as a $65 Dent repair certificate!
What do you have to do you ask? Easy!
Like this post and the ADS page, at 700 likes on our page the winner will be chosen!

https://www.facebook.com/AutoDentSolution

51A0X2cPC3L._SX425_

Glue pulling systems

In certain scenarios the best option to start with in removing a dent is our glue pulling system. This system involves a basic hot glue gun with special glue that we use to stick to the vehicle and then is slowly pulled out with one of our slide hammers.

Glue pulling on the rear gate

Glue pulling on the rear gate

Finished after our Paintless Dent Repair Process

Finished after our Paintless Dent Repair Process

Finishing Touches

Paintless Dent Repair, like most trades require certain finishing touches to come up with a finished product to make your vehicle like new. In this case our Paintless Dent Repair method was used on this ’53 Ford panel truck that was being restored by Ken, a customer of ours. His truck had beautiful body and paint work but had just a few dings keeping the body from being perfectly straight! In under an hour we had it good as new!

'53 Ford Panel Truck Restoration

’53 Ford Panel Truck Restoration