Dent on body lines are naturally more difficult to repair but don’t rule out paintless dent repair without first getting an estimate! Most body line dent can still be repaired as long as the metal is not too stretched!
Visibility is important, regardless of if we’re using the sunlight or inside during a rainy day. Using artificial lighting indoors helps us achieve great results. After our work is finished, you won’t see any dents no matter what lighting!
Here you can see an example of some pretty extreme paintless dent repair on a Toyota Tacoma. On a typical day we can repair a large number of small “door dings”. Unlike this repair we would only be able to do a few of these a day! These are more time consuming, but can still be repaired under the right circumstances! If Paintless dent repair is a possibility for your dent then you will likely save hundreds of dollars compared to using a traditional body shop!
Here we have a pretty severe fender dent that made creases at a couple different angles. This was repaired by gaining access from the under side of the fender which is just a plastic liner that is held in by a few plastic clips. We then would massage the dent out with our PDR tools while applying heat to preserve the paint. When we reach the finished product all that’s left is to put back the fender liner and clean up the area!
Here you can see a before/after picture of a repair Auto Dent Solution did on a Ford Mustang. This was a pretty sharp dent caused by falling boxes in the garage! We used a bit of heat while we worked this one out to preserve the original paint. The owner had a buyer lined up for this car before it got dented, but thankfully we were able to get it good as new for the new buyer!
Auto Dent Solution and its technicians are trained to work on all makes and models, including trucks. We receive many repair orders for all types of cars, but lets not forget all those pickup drivers! As you can see below we had a sharp dent located on the corner of the truck bed, which can be a fairly difficult repair. We were able to repair this dent in about an hour and it was done right at the customers house.
Sharp dents can be repaired using the process of Paintless Dent Repair. These sharp dents often require more time to repair and sometimes need to be heated up with a heat gun to keep the paint more flexible to avoid cracking. This dent was fixed on a Ford F-150.
This is an example of the occasional brand new cars that we get to work on. From time to time at the dealerships a new car will get a dent that hasn’t even been sold yet! That’s when we get called in to make that dent GO AWAY!
There are only two kinds of cars: those that already have dents, and those that will get them. If your car is in the first category – we’ll make the dents disappear!
Auto Dent Solution is known for removing dents and dings from the metal panels on your vehicle. Most customers and potential customers didn’t know that we can repair plastic bumpers as well! Unlike our repairs on steel and aluminum panels we use heat to make the plastic more flexible and able to be reformed.